Instructions to fix WHEA Uncorrectable Error Windows 10

WHEA Uncorrectable Error Windows 10 is a very scary BSoD, but not the only WHEA out there. WHEA Uncorrectable Error usually occurs when the system is overclocked or overheated. This error may prevent you from using your device, so you will have to restore it in Safe Mode.

Tweaking some BIOS settings has proven useful for some people, and we’ll show you how to do this.

The WHEA Uncorrectable Error that appears on Windows 10 on a blue screen can be caused by two reasons. Hardware failure or driver incompatibility with the operating system.

You basically won’t be able to use your desktop or laptop until you fix the problem. In the worst case scenario, the error message WHEA Uncorrectable Error Windows 10 occurs can be caused by hardware errors. Those errors include:

  • The hard drive is unresponsive.
  • The RAM memory is not responding.
  • The motherboard is not working properly.

Fix WHEA Uncorrectable Error Windows 10 by disabling overclocking in BIOS

1. Open Start and access Settings.

Fix whea uncorrectable error windows 10 by disabling overclock in BIOS

2. Go to Update Security and then select Recovery.

3. Click Restart now in Advanced startup and your computer will reboot.

Fix Uncorrectable Error Windows 10 by disabling overclocking in BIOS - picture 1

4. In Advanced startup, choose Troubleshoot, then Advanced Options then go to UEFI Firmware Settings.

5. Click Restart.

6. After the computer is restarted, it will automatically open the BIOS, go to Advanced.

7. Go to Performance And find Overclocking.

8. Make sure Overclocking is disabled.

9. Save the changes to the BIOS (by pressing F10 on the keyboard) and start the computer normally.

Keep in mind that overclocking a PC can cause many problems, including overheating, BSoD, and other technical glitches.

So overclocking software may trigger the WHEA Uncorrectable Error Windows 10. You can disable or uninstall any overclocking software you have on your PC to fix this problem.

After disabling overclocking, you should no longer have this problem, but if it persists, see one of the following solutions.

Check for any hardware problems

1. Enter Safe Mode as shown in the first tutorial.

2. Open Start and enter chkdsk.

3. Left click on chkdsk.

Check for hardware problems

4. Start chkdsk and let it run. If you get any breakpoints with an error, your hard drive may not be working properly.

Start Windows in Safe Mode and check the driver

1. Restart or shut down your Windows 10 PC.

2. When the PC boots, press F8 on the keyboard or key combination Shift + F8.

3. Mode Recovery will be turned on.

4. Select Safe Mode by following the instructions above.

5. After the computer boots at Safe Mode, move the mouse to the right side of the screen.

6. Click the search box in Start.

7. Type in the search box Device Manager.

Start Windows in Safe Mode and check the driver

8. After opening the Device Manager, we need to update each driver. This way we will see if one of the drivers causes this error to appear.

9. After updating the driver, we need to restart the PC

10. See if you still get the WHEA Uncorrectable Error Windows 10 error message.

Uninstall problematic Windows updates

1. Press Windows + I to open Settings.

2. Go to Update & security.

Uninstall problematic Windows updates

3. Click Update history.

Uninstalling problematic Windows updates - picture 1

4. Click Uninstall updates.

Uninstall problematic Windows updates - figure 2

5. A list of updates will appear.

6. Double-click a specific update to remove it.

Uninstall problematic Windows updates - figure 3

WHEA Uncorrectable Error Windows 10 can appear when Windows updates have problems. If you notice this error after a recent update, you may have to remove the update to fix this issue.

After removing the problematic updates, check if the problem still appears. If not, you should block installation of problematic Windows updates.

Turn off additional audio devices

1. Press Windows + WILL and enter sound

2. Select Sound from the list of results

Turn off additional audio devices

3. When the window Sound open, go to Playback

4. Right click on each non-default audio device and select Disable

5. Repeat the same steps for all recording devices

6. After doing that, click Apply and OK to save changes

Turn off additional audio devices - figure 2

Some users also recommend turning off additional audio devices from Device Manager. To do that, follow these steps:

1. Press Windows + X to open the menu and select Device Manager.

2. Locate the audio device and turn off all devices except the default one.

3. To turn off a device, just right click on it and select Disable.

4. When the confirmation message appears, click Yes.

Turn off additional audio devices- figure 1

According to users, the WHEA Uncorrectable Error message can appear due to audio devices. To fix the problem, you need to find and disable additional audio input and output devices. After disabling all non-default devices, the problem should be resolved.

These instructions help you pinpoint the exact cause of the blue screen error message you receive. If it’s a hardware problem, it could also be the graphics card, the motherboard, or it could be a damaged power supply.

In this case, we recommend going to the nearest tech support and informing them of the problems. They will likely have all the necessary hardware parts for your PC to replace them and let you know which part is having problems.

ThuthuatIT has just shared effective ways to fix WHEA Uncorrectable Error in Windows 10, hope this article gives you a lot of useful information, good luck!

Tags:

We will be happy to hear your thoughts

Leave a reply

App New
Logo
Reset Password