Instructions for 5 ways to enter Safe Mode in Windows 10 quickly

Safe mode in Windows 10 allows you to fix various problems on your computer.

Today’s article, ThuthuatIT will guide you How to enter Safe Mode in Windows 10 using the System Configuration utility, using Advanced Startup or entering Safe Mode Win 10 through the login screen.

What is Safe Mode?

Safe mode (safe mode) is a mode that helps Windows computer devices and Android phones restart with minimal services for users to check and diagnose where the device is failing to fix the error. .

When this mode is active, unrelated software will not work, thus preventing the virus from spreading throughout the device.

Thus, in case the computer fails without finding the cause, safe mode is the preferred choice.

Instructions on how to enter Safe Mode in Windows 10 with Advanced Startup

This method is actually a bit cumbersome, but it will be very useful in emergencies. So don’t see it around and ignore it.

Remember to save your work on your computer and close all applications before performing this procedure.

1. Launch the app Settings by pressing the . key Windows + I same time. You can also search Settings in the menu Start to launch this application.

2. Select Update & Security.

how to enter safe mode windows 10 - picture 1

3. Select Recovery from the left menu on the Update & Security screen.

4. Select the button Restart now below Advanced startup.

how to enter safe mode windows 10 - picture 2

5. On the screen Choose an option, Please choose Troubleshoot.

how to enter safe mode windows 10 - picture 3

6. Select Advanced options.

how to enter safe mode windows 10 - picture 4

7. Select Startup Settings.

how to enter safe mode windows 10 - picture 5

8. Select the button Restart to restart the computer.

how to enter safe mode windows 10 - picture 6

9. After the computer has finished booting, on the screen you will see the Safe Mode option, enter the number 4 to enter safe mode. Enter number 5 to boot in safe mode with networking. Use number 6 to enter safe mode with Command Prompt access.

how to enter safe mode windows 10 - picture 7

How to enter Safe Mode Win 10 from the login screen

If your PC turns on but can’t get past the login screen, you can use the method below to enter safe mode.

1. While on the login screen on your PC, select the power icon in the lower right corner, then hold down the Shift and choose Restart.

how to enter safe mode windows 10 - picture 8

2. When you reach the screen Choose an option, choose Troubleshoot > Advanced options > Startup Settings > Restart.

how to enter safe mode windows 10 - picture 9

3. After the computer has finished booting, on the screen you will see the Safe Mode option. Press F4 or key 4 to start Windows 10 in Safe Mode.

Instructions to enter Safe Mode Win 10 using System Configuration utility

Windows 10 has a utility called System Configuration and you can use it to start your computer in safe mode by following the steps below.

Note: Your computer will always boot in safe mode until you disable the safe mode option in the System Configuration utility.

1. Open menu Start, search and select widget System Configuration in search results.

how to enter safe mode windows 10 - picture 10

2. Select tab Boot .

3. Turn on Safe boot in Boot options. Select option Network if you want to access local network or internet in safe mode.

how to enter safe mode windows 10 - picture 11

4. Select Apply and then select OK to save the changes.

A message will appear asking you to restart the computer. Choose Restart to start the PC in safe mode.

To prevent your computer from starting in safe mode, open System Configuration, go to tab Boot and turn off the option Safe boot. Then choose Apply and choose OK to save the changes.

How to enter Safe Mode on Windows 10 from a black screen or a blank screen

If your PC just shows a blank or black screen, you can still restart your PC in safe mode.

1. Turn off the computer.

2. Press the power button to turn on the computer.

3. Repeat steps 1 and 2 3 times.

4. When you turn on the computer for the 3rd time, it will take you to the screen Choose an option. Choose Troubleshoot > Advanced options > Startup Settings > Restart.

5. On the following screen, press the number displayed next to safe mode to start your PC in safe mode.

How to enter Safe Mode with USB Recovery Drive

In case the computer cannot turn on nor can it enter the login screen, you can use USB Recovery Drive to enter Safe Mode.

Plug the USB Recovery Drive into the computer and follow the steps below:

1. On the screen Windows Setup, select language, time format, then press next.

how to enter safe mode windows 10 - picture 12

2. Select Repair your computer.

how to enter safe mode windows 10 - picture 13

3. Select Troubleshoot > Advanced Options > Command Prompt to open the command input window.

see more 10 ways to open Command Prompt on Windows

The steps below will be a bit complicated. It depends on the version of Windows 10 and how your computer’s boot partition is set up. First, enter the command below from the default drive, which will probably be X: as shown below.

4. Enter cdedit /set {default} safeboot minimal on the Command Prompt window and press Enter .

how to enter safe mode windows 10 - picture 14

If you get a message that the command “bcdedit” cannot be found, try other drive letters and go to the Windows/System32 folder. To do this, you can start with the C drive.

Import C: and press Enter. Then type dir and press Enter. If you don’t see the Windows folder, try the next character, D: and then E:, followed by the command dir. Finally, you should see one of them with the Windows folder where Windows 10 is installed.

Now enter cd Windows/System32. This will take you to the directory where bcdedit.exe is located. Now you can re-enter the command in step 4 and it should work.

5. Close the Command Prompt window.

6. Select tiếp tục on the screen and your PC will boot into safe mode.

Initially, this method does not work, however, once we find the Windows partition and navigate to the correct directory, we can run the command.

Extra tip: how to get out of Safe Mode

To boot the computer back into normal mode:

1. Open menu Start while the PC is in safe mode.

2. Enter and click System Configuration.

how to enter safe mode windows 10 - picture 15

3. On the tab General, choose Normal Startup.

how to enter safe mode windows 10 - picture 16

4. On the tab Boot, unchecked Safe boot.

how to enter safe mode windows 10 - picture 17

Finally, restart the computer to save the changes.

how to enter safe mode windows 10 - picture 18

If you have read the article and successfully entered Safe Mode Win 10, please leave a comment below to let us know which method works!

Tags:

We will be happy to hear your thoughts

Leave a reply

App New
Logo
Reset Password