Currently, smart mobile devices are all waterproof, depending on the product of each company that the company equips the device. For the current flagship device is Samsung Galaxy S7 and Galaxy S7 Edge Equipped with hardware that is not significantly different and all meet IP68 standards, they are capable of being submerged in water up to 1.5 meters deep for 30 minutes. However, Galaxy S7 there are no rubber covers at the charging port as above Galaxy S5. Instead, the devices will use a layer of corrosion-resistant material such as platinum or nickel. To prevent corrosion from contact with water, Samsung has coated with nickel or platinum the headphone jack, micro USB port and all other external metal parts such as the chassis.
If you go swimming with your Galaxy S7 with you, you will see “moisture detection error“(Moisture Detected Error), which is a new software feature Samsung added to the device. This device is pre-programmed to protect internal components to give warnings to the user when exposed to water. Just the presence of water or moisture in the charging port will disable the device’s ability to charge. This will help prevent damage to the strong internal plates and short circuits. So if high humidity is in your Galaxy S7, you will have to face the error “Moisture Detected ErrorBut there’s nothing to worry about. Here xaiandroid will show you how to avoid this error and charge your phone normally.
How to fix “Moisture Detected Error” on Galaxy S7 and S7 Edge
If you find the problem of high humidity error preventing you from charging through the USB port then you need to follow the following methods to disable this feature. Because when the humidity is high or there is water in the USB port, it will stop you from charging.
- If the phone gets wet, wipe it clean with a soft cloth and then shake the phone and remember the charging port is facing down to remove any remaining water in the USB port.
- Do not blow air into the charging port like water or moisture as it may get inside the device.
- Use a hair dryer and blow the hot air for a few minutes. Be sure not to overheat or it will damage the traction layer and rubber devices.
- Now, you use another dry cloth and wipe the USB port again to prevent water drops and moisture inside the USB port.
- Finally, reboot your device and plug it into the charging port. You can now charge the device back to normal.
Simply put, it’s best to be extra careful not to get the device wet as well as to have water on the USB port to be able to charge the phone normally.